Epsolar LS0512R Manuel d'instructions télécharger pdf (Page 11)

3 Installation Instructions

3.1 Mounting

Read through the entire installation section first before beginning

installation.

Be very careful when working with batteries. Wear eye protection.

Have fresh water available to wash and clean any contact with

battery acid.

Uses insulated tools and avoid placing metal objects near the

batteries.

Explosive battery gasses may be present during charging. Be certain

there is sufficient ventilation to release the gasses.

Avoid direct sunlight and do not install in locations where water can

enter the controller.

Loose power connections and/or corroded wires may result in

resistive connections that melt wire insulation, burn surrounding

materials, or even cause fire. Ensure tight connections and use cable

clamps to secure cables and prevent them from swaying in mobile

applications.

Battery connection may be wired to one battery or a bank of batteries.

The following instructions refer to a singular battery, but it is

implied that the battery connection can be made to either one

battery or a group of batteries in a battery bank.

 Select the system cables according to 3A/mm

current density.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Pas de commentaire

Epsolar LS0512R Manuel d'instructions Page 11